Oops! This site has expired. If you are the site owner, please renew your premium subscription or contact support.

1/8 Scale Outlaw Nitro


Engines:
   Must have carburetor return spring
   Any single engine sized .21 or larger (Nitro engine only)

Bodies:
Approved Body list: 
   A+ one piece
   C&M “Atomic SC”, “Assassin” & “Atomic”
   Losi # losa8096
   OFNA # 31143
   Onstat LM B-1 and B-2
   RJ Speed 1/8 Dirt Oval Body
   RJ Speed Mega Wedge 1/8 Dirt Oval Body
   Stalker
   Stalker SS
   Setser SS Late Model Body
   MACH 1 2014
   MACH 1 2015

Spoilers/Wings/Side dams:
1) Rear spoiler 3” max length
2) Left side dam-starting edge may begin from center of front axle with wheels straight to rear spoiler 
   and cannot extend past the rear spoiler. Maximum height of side dam can be 5”, must have
   two attachment points at least 8” apart. Must be clear and free of paint or stickers.
4) No additional wings, spoilers, flaps, etc can be added except what is stated in the rules.
5) No Metal is allowed to be added to any body, bumpers, wings or used as supports.
6) Bumpers must be made of shock absorbing material (no metal) and must be completely
   covered by the body.

Chassis:
1) Max track width 12.375”
2) No part of nerf wings or chassis may extend past the plane of the tires
3) MIN Wheel Base 12.375"

Drive train:
1) 4 wheel Drive only
2) Must use standard 3 diff setup (rear/center/front) with shafts connecting front to center and
   Rear to center. Each of the 3 diffs may house either a diff, locker, torsen, spool, one-way, 1 speed 
no 2 speed transmission.

Tires/Wheels: 
1) Tracks choice on which tires are legal (Foam or Rubber) from approved tire list! 
2) All wheels must be 17mm buggy based. 

Foam tire specs: 
Max tire diameter- 106mm Max tire width- 46mm
Rubber Tire:
ANY GT OR 1/8 SCALE STREET TREAD 17MM TIRE